₹20 में बनाओ प्रीमियम Wooden Coaster Set 🪵 DIY Woodworking Shorts #DIY
₹500 का कोस्टर सेट ₹20 में बनाओ!
| Cost | |
|---|---|
| Buying it finished | ₹500 |
| Building it yourself | ₹20 |
| You keep | ₹480 |
The build and what it costs
बची हुई लकड़ी के टुकड़ों से घर पर बनाएं शानदार Wooden Coaster Set! जानिए स्टेप-बाय-स्टेप कारपेंट्री तकनीक और बचाइए अपने पैसे। #Woodworking #DIY #HindiCrafts #Shorts #VibeShow
Retail price for this wooden coaster set runs around ₹500. The build described below comes in near ₹20 in materials — roughly 25 times cheaper. The saving is not a trick: it comes from buying raw stock instead of a finished piece, and from doing the shaping by hand.
Tools needed for the coaster set
Everything below is a hand-tool build; no power tools are required.
a carpenter's pencil — a sharp pencil line is what the saw actually follows.
a sharp chisel — a dull chisel bruises the wood instead of cutting it.
clamps — a piece that shifts mid-finish ruins the finish.
sandpaper — grit order matters and skipping a step shows through.
wood polish — the polish is what makes the grain read as depth instead of flat colour.
Making the coaster set step by step
मजबूत लकड़ी का चुनाव करो
आज हम बची हुई लकड़ी के टुकड़ों से एक शानदार और मजबूत वुडन कोस्टर सेट घर पर तैयार करेंगे।
सही नाप का निशान लगाओ
पेंसिल और स्टील रूलर की मदद से चार इंच चौकोर कोस्टर का बिल्कुल सीधा और सटीक नाप बना लीजिए।
a carpenter's pencil — a sharp pencil line is what the saw actually follows.
लकड़ी को सीधा काटो
हैंड सॉ चलाकर लकड़ी की लंबी पट्टी को चारों कोस्टर के लिए बराबर टुकड़ों में काट कर अलग कीजिए।
कटर से चौकोर टुकड़े काटो
सर्कुलर सॉ की तेज़ धार से हर एक कोस्टर को एकदम सटीक और साफ नब्बे डिग्री पर काट लें।
रंदे से सतह समतल करो
लकड़ी के रंदे से हल्के हाथ से छिलाई करके कोस्टर के दोनों तरफ की सतह बिल्कुल सपाट कर लीजिए।
स्टैंड में खांचा बनाओ
शार्प छेनी से लकड़ी के बेस पर कोस्टर रखने के लिए एक सुंदर और गहरा खांचा तराश लीजिए।
a sharp chisel — a dull chisel bruises the wood instead of cutting it.
क्लैंप से मजबूती से जकड़ो
होल्डर के जोड़ों को हैवी ड्यूटी वुड क्लैंप में कसकर लॉक कर दें ताकि जोड़ पत्थर जैसा पक्का रहे।
clamps — a piece that shifts mid-finish ruins the finish.
मशीन से खुरदरापन हटाओ
ऑर्बिटल सैंडर की मदद से कोस्टर की ऊपरी सतह और किनारों को एकदम बराबर और मुलायम बना लें।
सैंडपेपर से फाइनल फिनिशिंग दो
दो सौ बीस नंबर के महीन सैंडपेपर से रगड़कर हर एक कोने को मखमली स्मूथ टेक्सचर में बदल दीजिए।
sandpaper — grit order matters and skipping a step shows through.
कॉटन कपड़े से पॉलिश चमकाओ
कॉटन के कपड़े से नेचुरल वैक्स पॉलिश रगड़ते ही लकड़ी के रेशे और कुदरती रंग खिल उठेंगे।
wood polish — the polish is what makes the grain read as depth instead of flat colour.
प्रीमियम कोस्टर सेट तैयार है
सिर्फ बीस रुपये में लग्जरी कोस्टर सेट तैयार है, ऐसे असली वुडवर्किंग DIY के लिए सब्सक्राइब ज़रूर करो!
Where beginners go wrong
Not clamping before finishing. If the piece can move while you are polishing, you will get uneven patches and they only show up once the light hits it.
What you end up with
A finished wooden coaster set, sanded and polished, at roughly the material cost stated above. The build time is short — the video below runs the whole process start to finish, which is the fastest way to see the order the steps actually happen in.